Tufts: Researchers Use SLA 3D Printing & Metal to Create Metamaterial Embedded Geometric Optics4/23/2019 Tufts: Researchers Use SLA 3D Printing & Metal to Create Metamaterial Embedded Geometric Optics http://bit.ly/2ZrZm2o Tufts University researchers are ready to revolutionize the realm of 3D printing further by using SLA 3D printing, metal, and wet etching to create optical components embedded with metamaterials. Authors Aydin Sadeqi, Hojatollah Rezaei Nejad, Rachel E. Owyeung, and Sameer Sonkusale explain more about their new technique in their recently published paper, ‘Three dimensional printing of metamaterial embedded geometrical optics (MEGO).’ Components such as the following are used in this approach:
The approach the researchers use is hybrid, using both 2D and 3D, and a mixture of complex structures and ‘novel functionalities.’ Metamaterials can function on many different levels, from serving as absorbers to electromagnetic devices. The team made two different examples: one worked as a single MEGO frequency selective parabolic mirror while another was a frequency selective device in the form of an omni-directional hemispherical moth-eye lens. The researchers combined optical and metamaterial features into one MEGO device for the optical parabolic reflector, 3D printed and then coated with metal and etching. The team did perform some additional manual steps after 3D printing, however, to create extras like curved mirrors, which were completed much more affordably in this process. Because the mold created looked like a moth eye, the researchers dubbed it the moth-eye absorber. It was printed on the SLA 3D printer, and then coated with silver paste. The authors state that they believe this is the first angle‐insensitive narrow‐band metamaterial absorber in the form of a hemispherical moth-eye absorber that was fabricated on a curved substrate.
3D printing is all about innovating, and most users (especially big industry players) embrace the benefits of researching, collaborating, and experimenting with techniques for making new items like conductive materials, ceramic molds, and even a variety of materials that are often quite unusual, from graphene and seaweed to mixtures of titanium and ceramic. Find out more about combinations in 3D printing like SLA and metal here. What do you think of this news? Let us know your thoughts! Join the discussion of this and other 3D printing topics at 3DPrintBoard.com. [Source / Images: Three dimensional printing of metamaterial embedded geometrical optics (MEGO)] Printing via 3DPrint.com | The Voice of 3D Printing / Additive Manufacturing https://3dprint.com April 23, 2019 at 02:45AM
0 Comments
Leave a Reply. |
Categories
All
Archives
April 2023
|