Shandong University Researchers Working on Optimal Parameters for 3D Printing PEEK http://bit.ly/2ENyG3o In their recently published paper, ’Experimental study on parameters of 3D printing process for PEEK materials,’ researchers from Shandong University of Technology conduct experiments regarding the use of PEEK 3D printing materials for creating artificial bone. While there have historically been many challenges in bone regeneration techniques, authors H. Liu, X. Cheng, X. H. Yang, G. M. Zheng, and Q. J. Guo realize the need for high performance, strong materials produced with efficiency and as little waste and impact on the environment as possible. During the course of their research, the authors realized that the optimum parameters for printing with PEEK materials in 3D printing are as follows:
While there are numerous ways to make bone, clearly refinements can be made in the process—with the use of special engineering plastic Polyetheretherketone (PEEK) showing the most promise overall due to its outstanding strength, stability, and best of all—biocompatibility. Coupled with the opportunities for customization offered by 3D printing, PEEK materials and processes surrounding their use merit further exploration. In this study, the authors 3D printed a variety of different cubes for experimentation, each with a length of 34 mm, a width of 12 mm, and a height of 3 mm.
The researchers completed 17 runs, as outlined in Table 2: For the verification experiment, the researchers used the aforementioned best parameters, resulting in success when compared with the control model. The authors stated that in comparison influence of each output response in comparison to the factors in their research was critical as interactions between said factors was so influential regarding the outcome.
3D printing and bioprinting for the regeneration of bone have become a serious focus for researchers around the world, eager not only to make scientific strides, but also to help eliminate pain and suffering for patients with conditions related to bone loss. From continued success using titanium to the use of nanofibers, to magnesium alloys, researchers continue to make impressive progress in the field of medicine. What do you think of this news? Let us know your thoughts! Join the discussion of this and other 3D printing topics at 3DPrintBoard.com. [Source / Images: ’ Experimental study on parameters of 3D printing process for PEEK materials’] Printing via 3DPrint.com | The Voice of 3D Printing / Additive Manufacturing https://3dprint.com May 31, 2019 at 02:06AM
0 Comments
Leave a Reply. |
Categories
All
Archives
April 2023
|