http://bit.ly/2ERj942
Researchers 3D Print a New Variety of Zinc Ion Battery Shapes for Wearable Devices http://bit.ly/2CBl8Ht With the development of flexible wearable devices comes the need for new battery shapes, as most batteries are currently limited to spherical or rectangular shapes. These shapes do not use space as efficiently as other shapes could, so a team of researchers led by Professor Il-Doo Kim from the Department of Materials Science at KAIST and Professor Jennifer Lewis from the School of Engineering and Applied Sciences at Harvard University have used 3D printing to manufacture batteries with a variety of novel shapes. These shapes include ring-type, H and U-shaped batteries. Through a research collaboration with Dr. Youngmin Choi at the Korea Research Institute of Chemical Technology (KRICT), these 3D printed batteries were applied to small wearable electronic devices, namely wearable light sensor rings. The team adapted environmentally friendly aqueous Zn-ion batteries to make customized battery packs. The system, which uses Zn2+ instead of Li+ as charge carriers, is much safer than rechargeable lithium batteries, which use highly flammable organic electrolytes. The processing conditions of these lithium-ion batteries is also highly complicated, as organic solvents can ignite upon exposure to moisture and oxygen. The aqueous Zn-ion batteries are stable upon contact with atmospheric moisture and oxygen, so they can be fabricated in ambient air conditions. They also have advantages in packaging, since packaged plastic does not dissolve in water even when 3D printed. The researchers used an electrospinning process to fabricate a carbon fiber current collector and uniformly coated electrochemically active polyaniline conductive polymer on the surface of the carbon fiber for a current collector-active layer integrated cathode. The cathode, which is based on conductive polyaniline consisting of a 3D structure, exhibits extremely fast charging speeds, with 50 percent of the charge being completed in two minutes. It can be fabricated without the detachment of active cathode materials, so various battery forms with high mechanical stability can be manufactured.
The research was published in a paper entitled “High-Power Aqueous Zinc-Ion Batteries for Customized Electric Devices.“
Most current battery shapes are optimized for coin cell or pouch cells. Since batteries occupy most of the space within microelectronic devices, different shapes are required to fit the new wider variety of devices. The researchers’ success could lead to more of a variety of wearable devices, including very small ones. In related news, Professor Kim was appointed as an Associate Editor of ACS Nano, in which the article was recently published.
Authors of the paper include Chanhoon Kim, Bok Yeop Ahn, Teng-Sing Wei, Yejin Jo, Sunho Jeong, Youngmin Choi, Ill-Do Kim and Jennifer A. Lewis. Discuss this and other 3D printing topics at 3DPrintBoard.com or share your thoughts below. [Source/Images: KAIST]
Printing via 3DPrint.com | The Voice of 3D Printing / Additive Manufacturing https://3dprint.com December 26, 2018 at 03:30PM
0 Comments
Leave a Reply. |
Categories
All
Archives
April 2023
|