US Army and Researchers 3D Print Microfluidic Channels on Curved Surface in an Open Lab
The field of microfluidics continues to grow as it’s used in a variety of applications: tissue engineering, drug screening and delivery, sensors, bioprinting, and more. Microfluidics involves manipulating and controlling fluid flows at the micron scale; they are essentially a tiny plumbing system with an increasing overlap with 3D printing. The traditional way to make microfluidic devices is through a complex photolithography technique, which requires several steps and takes place in a cleanroom with a controlled environment. A silicone liquid is sent flowing over a patterned surface, then cured so the patterns will form channels in the solidified silicone.
But a team of researchers from the University of Minnesota, together with the U.S. Army Combat Capabilities Development Command Soldier Center, figured out a way to 3D print fluidic microscale channels that could be used to help automate the fabrication of sensors, diagnostics, and assays for medical testing… no cleanroom necessary.
McAlpine, who holds the Kuhrmeyer Family Chair Professorship in the Department of Mechanical Engineering, is also the senior researcher for the team, which published a study about their work, “3D printed self-supporting elastomeric structures for multifunctional microfluidics,” in the peer-reviewed Science Advances journal. Other co-authors of the study are UMN mechanical engineering graduate student Ruitao Su; UMN electrical and computer engineering researchers and PhD candidates Jiaxuan Wen and Qun Su; US Army CCDC Soldier Center researcher Dr. Michael S. Wiederoder; UMN’s Louis John Schnell Professor in Electrical and Computer Engineering Steven Koester; and Dr. Joshua R. Uzarski, also with the Army’s CCDC Soldier Center.
What’s really exciting here, according to the researchers, is that this is the first time we’ve seen microfluidic structures 3D printed directly onto a curved surface. This is one important step closer to printing them right on a person’s skin in order to sense bodily fluids in real time.
The team used a custom 3D printer to print microfluidic channels—three times the size of a human hair—directly on a surface, in just one step, in an open lab, not in a cleanroom setting. They used a series of valves to control, pump, and re-direct fluid flow through the tiny channels. All devices used in the research act as a proof of concept for their hypothesis.
The microfluidics that the team 3D printed onto a curved surface were also integrated with electronic sensors for lab-on-a-chip capabilities.
While 3D printing the microfluidic channels onto a curved surface certainly makes them unique, another important aspect of this research is the fact that they could be fabricated outside of a cleanroom setting. This means there is a future where the devices can be produced, with repeatable results, with robotic-based automation.
Parts of this research were completed in the Minnesota Nano Center, which is supported by the National Science Foundation through the National Nanotechnology Coordinated Infrastructure (NNCI) Network. The work was funded by the US Army Research Office via the CCDC Soldier Center; the National Institute of Health’s (NIH) National Institute of Biomedical Imaging and Bioengineering; and the Minnesota Discovery, Research, and InnoVation Economy (MnDRIVE) Initiative.
(Source: University of Minnesota)
via 3DPrint.com | The Voice of 3D Printing / Additive Manufacturing https://3dprint.com
October 16, 2020 at 08:32AM