Solvay Adds PEEK and PPSU 3D Printing Materials to Digimat http://bit.ly/2WxgemB Solvay has just added its 10% carbon fiber filled KetaSpire PEEK and Radel polyphenylsulfone (PPSU) materials to Digimat Additive Manufacturing. Digimat is a software package made by e-Xstream engineering that lets users simulate materials and their real-world performance. Digimat lets materials scientists select and simulate materials that they can model. The Digimat Process Simulation tool lets you anticipate and simulate part warpage, distortion or built up stress in 3D printed parts. One can look at the thermomechanical performance of a material or how it performs under load. Digimat gives companies that make parts with 3D printing the confidence to assess the real world performance of those parts while simultaneously giving polymer companies the ability to “mix” good new materials. By adding their two materials to Digimat Solvay is signaling that they intend to use these materials for manufacturing and wants to enable customers in that field. It is like a comforter blanket that will make engineers feel secure enough that the part can actually go on the car or plane. It seems that competition in high-performance polymers is heating up. Solvay’s PPSU material is autoclavable material with temperature resistance above a 180 C that was previously already on offer in several firms. Superior steam and chemical resistance make PPSU the material of choice for a high number of high-performance applications ranging from medical to industrial pipes and things like valves. PPSU is kind of a Bob the Builder kind of material it is not like super wow or anything but it gets the job done. It has broad applicability in many industries and will help people fill niches and expand applications for 3D printing. Printability is high and it is a comparatively easy material to work with. This in contrast to the Prima Donna of 3D Printing materials PEEK. PEEK is a very high-performance material of the PAEK family. This material has very high abrasion, chemical, and heat resistance. PEEK’s strength to weight and continuous service temperature are some of the highest in Fused Deposition Modeling. One needs a 380 C or more nozzle temperature to extrude PEEK and the material is a straight up nightmare to print. PEEK was already on the market through firms such as 3D4Makers, 3Dxtech, Roboze, and others. Solvay has chosen not to focus on an unfilled grade pf PEEK but instead a 10% Carbon Fiber KetaSpire PEEK. This is probably in response to everyone’s higher strength and stiffness wishes. I’m not a fan of filled materials because at the end of the day recycling is going to be troublesome if not impossible. Carbon Fiber PEEK is however what now the aerospace guys are daydreaming about so its a logical choice for the firm. It is notable that Solvay sells its filaments directly through its own online shop. Other polymer companies have gone exclusively through channel or focus on channel as a part of their distribution strategy. Ideally, this does let Solvay obtain more margin and more contact with the market. At such an early stage of their market entry, this would be a smart choice keeping them close to a fast-moving market and the applications that will bring in volume for them. In the long run for different markets and areas resellers may very well be a better proposition. I must confess that I’d never even heard of Digimat before DSM released a filled material on Digimat at Formnext. Great stuff for Digimat to have these polymer companies do their marketing for them. Christophe Schramm, Additive Manufacturing business manager said that,
On the whole, these are the two perfect materials in the Solvay portfolio to lavish extra attention on and we can’t wait to see what other firms do in response.
Printing via 3DPrint.com | The Voice of 3D Printing / Additive Manufacturing https://3dprint.com January 31, 2019 at 12:06AM
0 Comments
Leave a Reply. |
Categories
All
Archives
April 2023
|