MINI Electric Pacesetter Features 3D Printed Parts Made from Recycled Carbon Fiber

MINI Electric Pacesetter Features 3D Printed Parts Made from Recycled Carbon Fiber

https://ift.tt/3sE2vub

Though BMW may have discontinued MINI’s mass customization program, it has applied 3D printing in a more unique and interesting way in its FIA Formula E Safety Car, the MINI Electric Pacesetter. The new pace vehicle features 3D printed components made from recycled carbon fiber.

As discussed in our series on carbon fiber 3D printing, the material is not the easiest to recycle, given the fact that the material is meant to be durable and chopped fibers have less utility than continuous fiber reinforcement. Fortunately, as a newer manufacturing segment that regularly uses chopped carbon fiber-reinforced plastic, there are many opportunities to recycle the material. And, here, it seems that BMW-owned MINI has found one.

The spoiler is 3D printed using recycled carbon fiber. Image courtesy of TuningBlog.EU.

The styling of the Pacesetter is based on the MINI JCW GP racer, including similar fender blades and wheels, along with the same roof spoiler, but with a light bar on top. What may draw the eyes of our readers, however, is the fact that the exterior components related to aerodynamics are all made from 3D printed, recycled carbon fiber, including the fender blades, spats, and rear wing. Inside the vehicle, you’ll find 3D printed parts. Specifically the removable cushions padding the racing buckets are 3D printed and could potentially be adapted to fit a rider’s shape, weight and taste.

Removable, 3D printed seat cushions. Image courtesy of TuningBlog.EU.

These features and more reduce the overall weight of the car, which is about 286 lbs (130 kgs) less than the MINI Cooper SE. In turn, this allows the Pacesetter to reach 60 mph in 6.7 seconds, compared to the 7.3 seconds of the Cooper SE, even though it features the same powertrain.

“With the MINI Electric, we have already shown how well driving fun and electromobility go together,” said Bernd Körber, Head of the MINI Brand. “The MINI Electric Pacesetter inspired by JCW goes at least one step further and combines the performance character of the John Cooper Works brand with electric mobility. Of course, this extreme form as a safety car for the ABB FIA Formula E World Championship E racing series is not intended for road use. When you see the vehicle, you can see where we could go in terms of electrification of the JCW brand. For me it clearly shows: electrification and John Cooper Works go together.”

The MINI Electric Pacesetter will hit the track April 10, 2021 in Rome for the second Formula E event of the season. Like much of what we see in auto sports, this use of 3D printing is more of a test and demonstration than it is a fully fledged application of the technology. In this case, in particular, it isn’t actually being deployed for the race itself, unlike many of the other auto sports stories we cover. However, maybe MINI is foreshadowing some 3D printed features of the JCW GP car. Regardless, BMW is one of the heavier users of 3D printing in the automotive industry, so we’re sure to see the technology used more and more in end use parts.

Printing

via 3DPrint.com | The Voice of 3D Printing / Additive Manufacturing https://3dprint.com

March 31, 2021 at 08:36AM