https://ift.tt/2Uh1PKE
Developing 3D Printed Soft Actuators for Robotic Arms https://ift.tt/30NdHXo As 3D printing and electronics continue to advance—along with robotics—soft actuators are becoming a great subject of study, as thesis student Hong Fai Lau outlines in the recently published, ‘3D-Printed Inflatable Actuators – Design and Development of Soft Actuators for a Pneumatically-Actuated Soft Robotic Arm.’ Studying the design process, but also parameters and interdependencies, Hong Fai Lau experiments with 3D printing inflatable actuators for the eventual possibility of using them in a robotic arm integrating two degrees of freedom. Hong Fai Lau realizes there is a serious shift happening with the advent of soft actuators, and more specifically, those that are inflatable:
Creating such actuators is no easy feat, however, accompanied by an ‘exhaustive list’ of parameters. Hong Fai Lau realizes that the actuator with the most potential is the Elastic Inflatable Actuator (EIA)—a device that functions while under positive pressure. Other actuators with great promise are the Bending-type EIA and the Rotary Soft Pneumatic Actuator, featuring an ‘inelastic’ fabric layer that bypasses the need for an external mechanism. For 3D printing in this research, Hong Fai Lau explored both multi-jet fusion and polyjet, using a design suitable for a soft robotic arm with two DoF. The author found this part of the project particularly challenging as the design required two different phases based on complexity, with all the following design details:
First, the linear actuators were created, with both shape and suitable materials studied. Next, the analysis was used to create a complete mechanical design for the research project, furthered with both simulation and experimentation. In exploring all the challenges in creating such work, the author points out that it is always better to seek inspiration from nature. In the future, the researcher expects to see more use of flexible materials for 3D printing—along with ‘application in the rotational domain.’ Also expected are integration of design parameter optimization, and further exploration of 3D printing parts for the robotic arm—along with creating lighter weight components.
Soft actuators are being created within the 3D printing realm more commonly today from using shape memory polymers to more technical 4D printing, and components that are highly optimized. What do you think of this news? Let us know your thoughts! Join the discussion of this and other 3D printing topics at 3DPrintBoard.com. [Source / Images: ‘ 3D-Printed Inflatable Actuators – Design and Development of Soft Actuators for a Pneumatically-Actuated Soft Robotic Arm’] Please enable JavaScript to view the comments powered by Disqus. Printing via 3DPrint.com | The Voice of 3D Printing / Additive Manufacturing https://3dprint.com August 30, 2019 at 06:12AM
0 Comments
Leave a Reply. |
Categories
All
Archives
April 2023
|