AZO and AddUp Partner to Automate Powder Handling for Metal 3D Printing
Metal powders are some of the most finicky materials in the 3D printing industry in that, not only do the metal particles require a high level of consistency, sphericity, and small size range for powder bed fusion (PBF), but every metal is quite different from one another. Moreover, many can be toxic or even highly explosive.
For this reason, handling metal powders is no easy task, typically requiring elaborate systems with inert gas environments to depowder parts and prepare subsequent builds, all within a well-regulated facility. To ease the burdens of this costly, labor-intensive and sometimes dangerous process, French 3D printing company AddUp teamed up with the AZO Group to develop a fully automated powder handling and feeding system for metal 3D printing.
AZO is a €167 million German company with offices across seven countries. It is dedicated to the automation of raw materials processing. For this reason, AddUp, an entity started by Michelin and the Fives Group, turned to AZO France for a customer-specific solution for an inert metal powder handling solution for feeding the material to a 3D printer. This led to the development of a production-ready powder supply system in 2019 that further led to versions that could be adaptable to the variety of machines supplied by AddUp.
The fully automated system was meant to feed raw material continuously to the printers to prevent downtime, while also discharge excess powder from the print job, as well as process the unsintered excess material, screen it, and then feed it back into the system. And it was meant to do this all while keeping the operator as safe as possible.
The resulting solution features three modules: material supply and preparation; material conveying, and the printer feeder itself. The first area features a sealed and inert GloveBox where new powder is supplied via small containers and fed by a vacuum to a screening module. There it undergoes ultrasonic screening specifically developed for metal powder.
Next, the material is fed in the proper quality, quantity and rate of time via vacuum conveyor to the printer. There, it is transferred to the printer in the correct quantity. Excess material from previous builds is removed, centrally collected in a container and transferred pneumatically to the initial screening module, where it is sieved, processed and brought into the closed-loop production cycle. AZO notes that the system can be designed for different material inputs and the number of printers. It can be scaled from small systems for a single printer to “collective feeding of entire printing factories.”
Necessary to the solution is a control system, which includes a web-based user interface and the ability to access the AZO powder module from the 3D printer itself. The system is further able to recognize which modules are available and automatically activate or deactivate the based on the operation.
Safety features include the fact that the operator is never exposed to the metal materials directly and a failsafe that shuts down all affected functions if a hot-connect module fails, while all unaffected areas continue to operate.
The company summarizes its capabilities as follows:
It’s interesting to see this level of automation being delivered for metal 3D printing. It’s particularly noteworthy that this system could be applied to an entire factory. Meanwhile, numerous metal 3D printer manufacturers claim to be working on automated powder handling solutions, such as Concept Laser and 3D Systems, while Additive Industries already includes some automation in its MetalFab series.
AddUp is seeking to become an all-encompassing metal 3D printing provider, offering both laser PBF and directed energy deposition machines, as well as printing services and the engineering expertise required to apply all of the above to specific customer applications. If it happened to brand and sell AZO powder handling equipment, it would be well on its way to tackling all aspects of the metal 3D printing space, leaving only post-processing of metal parts to be not dealt with.
These trends are discussed in much greater depth in the recent “Automation, Additive Manufacturing and the Factory of the Future” report from SmarTech Analysis.
via 3DPrint.com | The Voice of 3D Printing / Additive Manufacturing https://3dprint.com
May 4, 2021 at 08:06AM